Bathtub Refinishing

Bathtub Refinishing Services in Buffalo NY


After decades of dog baths, abrasive cleaners, scratches from potted plants or drippy faucets that cause rust and eventually holes, even the toughest porcelain bathtub may need its surface spruced up bathtub refinishing. The same goes for fiberglass tubs, shower refinishing which are also vulnerable to cracking or splitting.

It used to be that you lived with your tub’s spots, chips and cracks, or you junked it. Companies that reglaze bathtubs. Refinish fiberglass bathtub and  refinish cast iron bathtub methods have gotten better and become a cost-effective refinishing bathtubs cost is an alternative to bathtub refitters removal and replacement. The bathtub refinishing near me tub refinishing and tile refinishing process can even turn those green, pink or yellow tubs out there a sleek, fresh color.


Virtually every surface problem from holes to bumps and blisters can be fixed.

People have misused drain acids to clear clogs. “These chemicals need to be poured directly into the drain so they don’t touch the tub,” he says. “But people pour the stuff in without even removing the standing water, so it ends up making the tub bottom look like the surface of the moon.

Proven Process

Cases of serious damage require a “bottom rebuild. Diamond sanding pads smooth away big bumps, then auto body fillers are applied to get everything flush. Splits in fiberglass tubs require “resupporting,” where holes are drilled in the tub and polyurethane foam is injected to expand and harden.

If you have plumbing problems or need replacement parts, you need to address them before reglazing. Signs of trouble: “Around drains you’ll see a buildup that may be from drips from the tub spout, or there’s rust.” “Too many of the old waste pipes fall apart underneath the tub if you try to take the old drain out and replace it. Age makes the fit too tight for us to risk removing them.”

Sometimes customers call in Surface Magic llc Buffalo NY a fiberglass bathtub refinishing contractors not to repair a tub, but to banish a dated color. Most tend to choose white or bone, “although we can create any color you want,” says Bob.

The Materials Used in Bathtubs

“You don’t see too many seafoam greens and yellows anymore. About the only time you get into color is antique tubs, where the inside is done in one color, the outside in another, the feet might be chromed or painted gold or silver and you’ll even find stencils.”

Glaze formulas vary from bathtub refinishing companies, but prep work is essentially the same. Old caulk around the tub is removed. Floors, walls, tiles and waste plates (the round plate below the spout that keeps the tub from overflowing) are covered to protect against damage. Before the glaze is applied, porcelain and enamel tubs are etched with acid washing (diamond abrasives achieve the same effect with fiberglass). The abrasion or etching creates a surface to which the glaze will bond. “If it’s not done right, it will peel.”